- Automatic Sensor Urinal Flush: When the human body enters the induction range, the sensor will send out the induction indication signal, 2 seconds after the induction signal is sent out, the flushing valve will automatically start flushing for about 2 seconds, and when the human body leaves the urinal flush valve will automatically flush about 6-7 seconds
- Adjustable Sensing Distance: Sensing distance is adjustable (0-23.62 inches), it can meet the various needs according to the specific environment to achieve the purpose of improving the level of public hygiene
- Water Saving: Equipped with an intelligent sensing panel, the device is able to accurately sense the distance and realize the automatic flushing function, which not only improves the water use efficiency, but also significantly reduces the waste of water resources
- Keep a Fresh Environment: The 9.53in large width, deep oval urinal, enlarge the sewage outlet and seven-hole hollow design can flush in all directions and achieve waterfall-style strong drainage without blockage or splashing, effectively removing the odor generated by urine
- Made to Last: The wall mounted urinal is mainly made of high-class 304 stainless steel, processed through brushing and integrated molding processes, which is sturdy, corrosion-resistant, rust-proof, wear-resistant
The automatic sensor urinal flusher is an ideal assistant to greatly improve your quality of life. The intelligent sensor water outlet design reduces your direct contact with the flusher and can effectively help you save water, providing you with a clean, fresh, and hygienic bathroom environment. The wall-mounted design makes it more space-saving. Application It is mainly used in restrooms or toilets in public places such as restaurants, shopping malls, airports, hospitals, schools, and other institutions. Specification Color: Silver Style: Modern Material: 304 Stainless Steel Process: Brushed, Integrated Molding Mounting: Wall Mounted Water Inlet Method: Exposed Water Inlet Drainage Method: Wall Drainage Assembly Required: Yes Power Source: 4* AA Alkaline Batteries Sensing Distance Adjustment Range: About 0-60cm/0-23.62in Flushing Time After Use: Approx. 6-7 Seconds Applicable Water Pressure: 0.1Mpa- 0.6Mpa Optimal Design Water Pressure: 0.1Mpa- 0.3Mpa Temperature: 0.1-45℃/33.18-113°F Nozzle Diameter: G1/2''(DN15) Energy Consumption: ≤0.5mW Urinal Width: 24.2cm/9.53in(Interior), 32.5cm/12.8in(Exterior) Product Size(L*H): 33*37cm/12.99*14.57in Package Size: 44*41*37cm/17.32*16.14*14.57in Gross Weight: 6.05kg/13.34 lbs Net Weight: 5.75kg/12.68 lbs Package Included 1* Automatic Sensor Urinal Flusher 1* Chinese Instruction Manual All Accessories for Use Notes 1.Please check the style and size before purchasing. 2.Please note that the specified range of water supply pressure refers to the working pressure at which the solenoid valve can switch water normally. To achieve the desired flushing effect, it is recommended that the water pressure range reach 0.3-0.6MPa. 3.When selecting the installation location, it is important to avoid direct sunlight or strong light shining on the sensor to avoid affecting the normal operation of the sensor. 4.Please do not leave any glass decorations or other obstacles within 3.28 feet in front of the installed sensor to avoid affecting its normal operation. 5.Please note that 4 AA alkaline batteries are not included in this product. 6.It is recommended that the water pressure is in the range of 0.3 to 0.6 MPa for satisfactory flushing results. 7.Attention: 1) Before installing the control box, please flush the newly installed pipeline with water to prevent blockage of the solenoid valve and prevent it from not flowing water or losing control! 2)Before installing this machine, please make sure to clean the water supply pipes and conduits that supply water to this machine, otherwise it may cause damage to the machine. 8.Instructions for using construction protective cover: 1)After the water and electricity construction is completed, cover this cover with screws and tighten it. 2)The tile surface shall not exceed the mouth of the protective cover. 3)The edges of the tiles and protective cover must be tightly attached. 4)After the wall decoration is completed, remove the protective cover and connect it to the sensor panel for debugging.
