- FUNCTIONAL: The wheelchair ramp can be used to overcome obstacles up to 0.2" high, especially for transition profiles between two types of floor, but can also be used to bridge cables or other objects.
- ADAPTABLE: Thanks to its cutting slots, the 35.5" ramp adapts to different door sizes, allowing the ramp to be cut to a minimum of 23.5" very easily.
- EASY TO TRANSPORT: Its small dimensions make it easy to transport anywhere. It can be used both indoors and outdoors.
- EASY TO CLEAN: For a good maintenance and cleaning of the ramp, we recommend avoiding alcohols or solvents and exposure to direct sunlight for long periods of time. Clean with a damp cloth.
- RECOMMENDED: Recommended for users with manual or electric wheelchairs, walkers or scooters in order to facilitate the passage against obstacles safely.
Product description ✓ Rear slot for fitting to door sills. ✓ Adjustable due to cut groove design. ✓ Non-slip surface. ✓ Patented. STRENGTHS DESIGNED FOR DOOR THRESHOLDS The design of the bridge threshold ramp has a rear slot to fit into the transition profile of the door threshold. It allows profiles up to 1/4” high to be bridged, providing support and security. ADJUSTABLE The wheelchair ramp is adaptable thanks to its cutting grooves. It adapts to different door sizes and can be reduced up to 23.5", with a maximum of 35.5". It is very easy to put up and take down. IMPORTANT: You need strength and a wide cutter with a large blade to make the necessary cuts. ANTI-SLIP The door ramp is designed with a non-slip texture on the entire surface to prevent slips and falls when using wheelchairs, walkers or pushchairs. HOW TO USE THE WHEELCHAIR RAMP STEP 1: Measure the width of the door. Take the ramp out of the box and spread it out so that it is evenly rolled up. The surface where it is to be placed should be even and not have a large unevenness. With the help of a meter measure the width between the door frames where you want to place the wheelchair ramp. STEP 2: Cut off the excess of the board Use a wide, large-bladed box cutter to cut the excess from the ramp in several passes. IMPORTANT: It is necessary to use force in the process. STEP 3: Separate both sides Fold the chosen slot several times to facilitate the process until both sides are separated. TIP: You can use the excess of the ramp as a door wedge. READY! Place the ramp on the transition profile of the door threshold to allow the wheelchair, walker or even the shopping trolley to pass through. IMPORTANT: The rear groove must be securely attached to the door threshold to prevent the ramp from slipping.
From the brand MOBILITY Visit the Store
