Male Sexy Black Rubber One-Pieces Mens Latex T-shirt Latex Shorts with Front Zip

Wearing In general latex clothes are designed to be tight-fitting. Therefore they can be difficult to put on without the aid of a lubricant. There are 3 main methods of preparing latex catsuit latex hoods for wearing. (1) Lightly dust the inside of the garment with talc before putting on the rubber catsuit, because stray talc and dust is very visible against the rubber. (2) Use a silicone-based lubricant. Apply a thin coating to the inside of the garment and your skin if necessary. (3) A third method of reducing or eliminating the high friction of latex when dressing is to chlorinate the rubber. Rubber can easily be marked or torn with fingernails if excessive force is used when pulling on your garment. Make sure your garment is well lubricated or talced. You may also wish to wear a pair of light cotton gloves to avoid any damage When handling latex with bare hands make sure they are clean before coming into contact with your garment. Never expose latex to essential oils Polishing By default, our latex garments are shipped unpolished.To shine, we recommend you use a silicone based polish, Never shine using furniture polish and avoid oil-based lubricants and creams as these destroy rubber. Do not rub the outer surface of yourl garment too hard, or with a rough cloth, as the glossy surface can be permanently scratched. Cleaning You can wash the rubber bodysuit in clean or warm water. Avoid detergents and soaps. Always wipe away excess water with a soft towel and leave to dry flat or hung up to drip dry. Never tumble dry, dry clean or iron your garment.