- 【Touch Button】The newly upgraded Fingerbot Plus is designed with touch buttons on the device, which can easily control the robot arm on/off by touching your finger, and turn the traditional switches and buttons into smart buttons through the robot button pusher. Can be used to on and off computers, TVs, floor robots, garage doors, wall switches, etc.
- 【Works even best with MOES Bluetooth gateway】With Bluetooth gateway(2.4GHz Wi-Fi only),you can conrtol your fingerbot remotely from anywhere and enable voice conrtol.Works well with Amazon Alexa,Google Assistant,Siri,Schedules can be set in the app to have specific devices turn on/off at preset timers.
- 【Simple Pairing Mode】Extremely simple pairing mode into Tuya Smart APP with your phone Bluetooth on and Within the Bluetooth connection range of about 10 meters,no hub required for accessing multiple intelligent functions and features in App.Up and down movement optional with 0-100 adjustable even featured as sustain time set.
- 【Suit 99% Scenarious】The stickers provided allow the fingerbot to be simply attached to any surface without swapping and without tools. The device can change its finger type to fit a variety of scenarios. Works well with just about any rocker switch and button of any appliance.
- 【Tuya Smart Ecosystem】Linkage with other Tuya devices is possible. Support Tuya/Smartlife APP.Need Bluetooth Hub .
Product description Variety of control methods Point to Point Control Within the Bluetooth connection range of about 10 meters you can use your cell phone Bluetooth to connect directly and control the fingerbot on smartlife APP. Smartlife APP/WiFi Control When you are outdoors, you can use the smart life APP for remote control (wireless remote control requires MOES Bluetooth gateway) Duration setting Fingerbot has long-press mode. You can set the hold time in the app. The longest hold time is 10 seconds. More fun with the MOES Bluetooth hub New upgraded Fingerbot Plus is designed with the touch button on the device for easier ON/OFF control of the robotic arm to home traditional switches and buttons. Bluetooth gateway is required for wireless remote control and voice control by voice assistants. Easy set up Clean the surface of button or switch panel where you want to install Fingerbot. Attach Fingerbot to the panel using a double-sided tape provided in the Fingerbot package. Connect your Fingerbot with the App and calibrate themovement of Fingerbot’s robotic arm to fifit your switches and buttons. After installation, we recommend resting Fingerbot for 24 hours to reach maximum adhesion. Device Power To power on the device, please open the case from behind and remove the battery insulation sheet before use. Device Resetting When pairing your Fingerbot to a new account, a device reset is needed. Please long-press the reset button for 5 seconds to reset the device. Device Installation Clean the surface of the button panel where you want to install the Fingerbot. Attach the Fingerbot to the panel using a tape provided in the package. Robotic Arm Extension After installation,resting the device for 24 hours to reach maximum adhesion the arm is replaceable in order to meet different needs.(Sold separately).
